Top Valve Manufacturers and Suppliers in the US – In recent years, the market for industrial valves manufactured in the United States has grown at an exponential rate. Petroleum, chemical, and water & wastewater industries control a large portion of the market. In the United States alone, valve sales and exports increased by 3.45% in 2021. For valve purchasers, this is a positive indication!
Valves are mechanical or electromechanical devices that regulate the flow of liquid or air through pipelines and tubes. Valves use mechanical barriers to open, close, or divert channels to control flow.
If you want to deal with a reputed Industrial Valve Manufacturer in the United States, this article is for you. Linquip’s Valve Experts have compiled a list of suppliers to assist you in selecting the best valve manufacturer in the country. Skills, facility size, services, certifications, overall ratings, and client evaluations are all factors in our decision.
Read about ANIX Valve USA
Top U.S. Valve Manufacturers
The following is a list of the top valve manufacturers in the United States, sorted from highest to lowest in terms of top-line yearly revenue. All revenue figures are in million of dollar and are based on publicly accessible corporate financial data.
Table 1: Top U.S. Manufacturers of Valves
| Company | Headquarter | Year Founded |
|---|---|---|
| Curtiss-Wright | Buffalo, New York | 1929 |
| Crane Co. | Chicago, Illinois | 1855 |
| Barnes Group | Bristol, Connecticut | 1857 |
| Actuant Corp | Menomonee Falls, Wisconsin | 1910 |
| Bi-Torq Valve Automation | Elburn, IL | 1981 |
Parker-Hannifin Corp. | Cleveland, Ohio | 1917 |
| Flowserve | Irving, Texas | 1997 |
| Emerson Electric Co. | St. Louis, Missouri | 1890 |
Curtiss-Wright
Curtiss-Wright produces cutting-edge technology for defense, power generation, aerospace, and general industrial applications. Curtiss-Wright, which was founded by the Wright Brothers and Glenn Curtiss, the pioneer of naval aviation, specializes in critical applications and high-performance industrial valves.
Ball valves, robust and specialty valves, triple offset, cryogenic, pressure reduction, and Zen-trol check valves, discharge control valves, by-pass control valves, injection and isolation control valves, and the likes are among the company’s key process valves.
Crane Co.
Crane Co. is a great valve maker, with $2,786 million in yearly revenue. Crane Co., based in Stamford, Connecticut, services a wide range of sectors, including aerospace and defense, as well as counterfeit detection. Sealed globe valves, safety valves, industrial diaphragm valves, and classic valves are all part of their product line.
Barnes Group
With $1,436 million in yearly sales, Barnes Group is a superior company. Barnes Group, based in Bristol, Connecticut, manufactures precision components for the industrial molding and aerospace industries. Barnes Group specializes in flapper and reed valves with high accuracy.
Actuant Corp
With $1,096 million in yearly revenue, Actuant Corp is a big valve producer in the world. Actuant, based in Menomonee Falls, Wisconsin, specializes in large hydraulic lifting equipment and precision vehicle components, and its Industrial Business Segment also sells valves.
Bi-Torq Valve Automation
Strahman Valves, Inc. has a subsidiary called Bi-Torq Valve Automation. The firm makes automated valves and offers a wide range of industrial valves, such as ball valves and butterfly valves.
Stainless steel valves in NPT with socket weld or flanged end connections are available in the Bi-Torq automated valve range. This category includes valves with sizes ranging from 1/2 inch to 6 inches. These come in a variety of pressure ratings, from Class 300 to Class 600. NPT connections are used on the brass valves, which come in sizes ranging from 1/4 inch to 4 inches. Automatic PVC and CPVC valves are available in sizes ranging from 12 inches to 4 inches, with NPT or socket weld connections. It has an ANSI Class 150 pressure class rating.
Parker-Hannifin Corp.
Parker Hannifin, formerly Parker Appliance, is a Fortune 250 global leader. Parker Hannifin is one of the leading corporations in the United States that concentrates on specialty industrial machinery, such as solenoid valves, and has a long history of invention. Industrial valves, fluid control systems, and static and dynamic sealing devices may all be found in Diversified Industrial. The firm creates original equipment and replacement components for applications such as packaging, processing, and transportation.
Read More on Linquip
- Top Manufacturing Companies and Suppliers in the USA
- Top Manufacturing Companies in California
- Top Check Valve Manufacturers in the USA
Flowserve
Flowserve began as a pump producer, but as the firm evolved, it expanded into other sectors, eventually becoming one of the leading gate valve manufacturers in the United States. Ball valves, rotary control valves, butterfly valves, linear control valves, gate valves, server service control valves, globe valves, check valves, and plug valves are all part of the Flowserve valve product line today. Flowserve is an ISO 9001:2008, ISO 14001:2004, and OHSAS 18001:2007 certified firm.
Emerson Electric Co.
Emerson is an automation solution provider as well as a well-known industrial valves manufacturer with a large product line. Emerson was named one of America’s most responsible firms by Newsweek and Statista. CE marking, CRN, PED, Lloyds’ Register, CUTR, NACE, SIL, ATEX, ABS, 3A, CSA, and IECEx are just a few of Emerson’s certifications.
Ball valves with sizes ranging from DN 25 to DN 400 are available. Chemical, oil and gas, food and beverage, water, pulp and paper, and wastewater applications are all served by Emerson. Emerson control valves can withstand temperatures as low as -40 degrees Fahrenheit. Carbon steel, alloy, stainless steel, duplex, 316 stainless steel, and 304 stainless steel are all options for these valves. Emerson is not just a valve maker, but also a major supplier of industrial valves. KTM, Neotecha, Virgo, Vanessa, Fisher, Tartarini, Keystone, Clarkson, and Yarway are among the brands available.
Read More on Linquip
- Valve Suppliers and Companies
- Control Valve Suppliers and Companies
- Butterfly Valve Suppliers and Companies
- Ball Valve Suppliers and Companies
- Knife gate valve Suppliers and Companies
Top Valve Suppliers in the USA
Additional domestic valve vendors are listed below and summarized in Table 2, organized by yearly revenue range.
Table 2: Top Valve Suppliers in the USA
| Supplier | Location | Year Founded | Annual Sales | Number of Employees |
|---|---|---|---|---|
| EVSCO | McHenry, Illinois | 1980 | - | 178 |
| Hayward Flow Control | Brooklyn, NY | 1923 | 5 M | - |
| Ari Valve Corp. | Marietta, GA | 1988 | 5 M | - |
| SVF Flow Controls | La Palma, California | 1988 | 24 M | 150 |
| Indeck Power Equipment Co. | Wheeling, IL | 1960 | 22 M | 117 |
| Specialty Mfg. Co. | Saint Paul, MN | 1900 | 5.9 M | 404 |
EVSCO, Inc.
EVSCO, Inc., based in McHenry, Illinois, specializes in the production of corrosion-resistant plastic valves and components, both standard and bespoke.
Hayward Flow Control
Elizabeth, New Jersey is home to Hayward Flow Control. They are an ISO 9001-certified thermoplastic valve and process control equipment company.
Ari Valve Corp.
The Ari Valve Corporation is based in Marietta, Georgia. The automotive, chemical, and food processing sectors all use Ari Valve Corp.’s products. Bellow seal, safety, and pressure control valves are among the valves they make.
SVF Flow Controls
SVF Flow Controllers is a manufacturer of flow control technologies, including valves, controls, actuators, and accessories, situated in La Palma, California. Ball valves, globe valves, gate valves, check valves, and butterfly valves are among their valve offerings, which come with both manual and actuated control choices. General-purpose valves as well as specialist materials for high purity (Hygienic) and fire-safe applications are among the company’s products, which are used in commercial, industrial, and medicinal applications.
Indeck Power Equipment Co.
Indeck Power Equipment Co. is a boiler engineering company based in Wheeling, Illinois. Safety valves, check valves, and blowdown valves are among the valves they make for boiler assemblies.
Specialty Mfg. Co.
The Specialty Manufacturing Company is a valve and dental component manufacturer based in Saint Paul, Minnesota. Their valve products section produces a wide range of valves in a number of materials, including brass, stainless steel, and plastic.
Conclusion
In the United States, valve companies have a long tradition of creating high-quality industrial valves. Their goods and services are now available all over the world. Buying valves from a local manufacturer is a fantastic choice if you want unquestionable quality and confidence. As a result, we hope this list has helped you find valve manufacturers in the United States. On this page, we’ve provided data and summaries for some of the most well-known domestic valve manufacturers. We hope you find this information to be helpful in your supplier search. To discover more about these firms and to gain information on over 800 valve suppliers, go to the Linquip Industrial Valve Suppliers.
Read More on Linquip
- Valve Manufacturers
- Needle Valve Manufacturers
- Pinch Valve Manufacturers
- Globe Valve Manufacturers
- Solenoid Valve Manufacturers
Buy Equipment or Ask for a Service
By using Linquip RFQ Service, you can expect to receive quotations from various suppliers across multiple industries and regions.
Click Here to Request a Quotation From Suppliers and Service Providers
dear sir, our company has purchased 5 butterfly check valves 48 in, the disc material is astm a351 cf3m, it was determined by conducting ferrite measurement that there is 12 to 22% ferrite in the disc material, considering that the valve is astenitic and is equivalent to 316l wrought. Astm a800 has been referred and the prediction of the amount of ferrite for cast material is done based on the Schoefer diagram, now the question is, is the amount of ferrite based on a800 after completion of casting or after completion of dissolution annealing?
And if the amount of ferrite is after cast and before anneal solution, how is the percentage of ferrite determined after anneal solution, can anneal solution have a great effect on the percentage of ferrite of the mentioned material, and please introduce a standard reference, thank you